環境控制

DM-RMC-100-C

編碼/解碼介面

Provides a controller and interface for a high-definition display device as part of a complete DigitalMedia System. Connects to the DM 8G+ output of a DM Switcher or Transmitter via CAT5e or DM 8G Cable. Includes IR, RS-232, and Ethernet control ports.

The DM-RMC-100-C provides a simple one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+™ receiver and control interface, providing a single HDMI® output along with Ethernet, RS-232, and IR control ports. In addition to DM 8G+, it is also compatible with HDBaseT™ specifications, allowing it to be connected directly to any HDBaseT compliant source. Its compact, low-profile design allows the DM-RMC-100-C to be installed discreetly behind a flat panel display or above a ceiling mounted projector. It connects to the head end or source location using a single CAT5e or Crestron DM 8G® cable.

Video
	Input Signal Types	DM 8G+™ (DigitalMedia™ over one CAT5e twisted-pair copper wire), HDBaseT™ ^[1]
	Output Signal Types	HDMI®, DVI^[2]
	Formats	HDMI w/Deep Color & 3D, DVI, HDCP content protection support
	Input Resolutions, Progressive	640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock
	Input Resolutions, Interlaced	720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock
	Output Resolutions	Matched to input
Audio
	Input Signal Types	DM 8G+, HDBaseT
	Output Signal Type	HDMI
	Formats	Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, Up to 8ch PCM
Communications
	DigitalMedia	DM 8G+, HDCP management, EDID format management, CEC, PoDM, HDBaseT compliant
	Ethernet	10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
Connectors
	HDMI OUT	(1) 19-pin Type A HDMI female; HDMI digital video/audio output; Also supports DVI^[2]
	COM	(1) 5-pin 3.5mm detachable terminal block, bidirectional RS-232 port; Up to 115.2k baud, hardware and software handshaking support
	IR 1 – 2	(1) 4-pin 3.5mm detachable terminal block comprising (2) IR/Serial ports; IR output up to 1.1 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
	LAN	(1) 8-wire RJ45 female, shielded; 10Base-T/100Base-TX Ethernet port
	Ground	(1) 6-32 screw, chassis ground lug
	DM IN	(1) 8-pin RJ45 female, shielded; DM 8G+ input, HDBaseT compliant; PoDM and PoH PD (Powered Device) port^[3]; Connects to the DM 8G+ output of a DM switcher, transmitter, or other DM device, or to a HDBaseT device, via CAT5e or Crestron DM-CBL-8G cable^[1]
	24VDC 0.75A MAX	(1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; PW-2407WU power pack included
Controls & Indicators
	HDMI OUT	(1) green LED, indicates video signal presence at the HDMI output
	LAN	(2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
	DM IN	(2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence
	RESET	(1) miniature recessed pushbutton, for hardware reset
	SETUP	(1) red LED and (1) miniature recessed pushbutton, for Ethernet setup
	24VDC	(1) green LED, indicates operating power supplied via local power supply, PoDM, or PoH
Power Requirements
	Power Pack	0.75 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included
	Power over DM (PoDM)	PoDM PD (Powered Device), capable of being powered by a PoDM PSE (Power Sourcing Equipment), conforms to IEEE 802.3af (802.3at Type 1) Class 3^[4]
	Power over HDBaseT (PoH)	PoH PD (Powered Device), capable of being powered by a PoH PSE (Power Sourcing Equipment), conforms to IEEE 802.3af (802.3at Type 1) Class 3^[4]
	Note: May be powered via power pack or PoDM/PoH, not both.
Environmental
	Temperature	32° to 104°F (0° to 40°C)
	Humidity	10% to 90% RH (non-condensing)
	Heat Dissipation	29 BTU/Hr
Enclosure
	Chassis	Metal, black finish, with (2) integral mounting flanges, vented top and bottom
	Mounting	Freestanding, surface mount, or attach to a single rack rail
Dimensions
	Height	6.09 in (155 mm)
	Width	5.63 in (143 mm)
	Depth	1.02 in (26 mm)
Weight
	16.5 oz (468 g)