CLSI-C6

燈光控制系列

Wall-mount integrated lighting and shade control
Six channels of dimming or switching
Six groups of shade and drape control
Supports Cresnet^® Occupancy Sensors and Shades^[2]

The iLux^® CLSI-C6 is a complete, integrated lighting system designed for wall mount installation in boardrooms, auditoriums, home theaters, or anywhere versatile and cost-effective control of lighting and shades is required. The Crestron^® reputation for innovation and reliability—combined with high-quality integrated dimming, native shade control, configurable rocker buttons, extensive integration ability, and many other advanced features—makes iLux the ideal choice for all types of room lighting and shade control applications.

Load Ratings
	Dimmer Channels	6
	Maximum Per Channel	800 Watts/VA (3.5 Amps @ 230 Volts AC)
	Minimum Per Channel	25 Watts/VA (0.108 Amps @ 230 Volts AC)
	Module Total	2200 Watts/VA (10 Amps @ 220 Volts AC); 2300 Watts/VA (10 Amps @ 230 Volts AC); 2400 Watts/VA (10 Amps @ 240 Volts AC)
	Load Types	LED^[1], Incandescent, Magnetic Low-voltage, Neon/Cold Cathode, 2-Wire Dimmable Fluorescent, & Non-Dim Lighting (also: Electronic Low-voltage, 3- and 4-Wire Fluorescent, High-Inrush Switching, & 277V via CLS-EXP Series expansion modules)
Power Requirements
	220 to 240 Volts AC, 50/60Hz line power
Connections
	LOCAL DEVICES	(1) 4-pin 5mm detachable terminal block; Cresnet® Master port for local devices including: CNPWSI-75 C2N-DB and CNX-B Series keypads, 16 maximum; C2N-SSC-2 and C2N-SDC-DC shade controllers; 16 maximum; Additional CLSI-C6 or CLSI-C6M units, 8 maximum; Additional or other Cresnet power supply required beyond 4 devices; C2N-SDC-DC always requires an additional power supply
	CONTROL SYSTEM	(1) 4-pin 5mm detachable terminal block; Cresnet Slave port for connection to a control system
	HOT	(1) Captive screw terminal^[3], line power input
	LOAD1 – LOAD6	(6) Captive screw terminals^[3], dimmer channel outputs 1 – 6
	NEUTRAL	(1) Captive screw terminal^[3]
	GROUND	(1) Captive screw terminal^[3]
	PC (front)	(1) 3.5mm TRS mini-phone jack, RS-232 Programming port
Controls
	Buttons 1 – 6	(6) 3-position rocker pushbuttons; configurable to recall (or toggle recall/off) individual scenes, control shades, or for master lighting or shade control; “scene mastering” option enables manual dimming utilizing rocker button action; also used to adjust lighting levels when in “Lighting” mode and shade positions when in “Shades” mode; additional functionality configurable via software
	Up/Down Button	(1) 3-position rocker pushbutton; configurable for master lighting or shade control, or as a “shift” for Buttons 1-6; additional functionality configurable via software
	ON	(1) pushbutton, recalls “On” scene
	OFF	(1) pushbutton, turns all lights off
	LIGHTS, SHADES	(2) Pushbuttons, select “Lights” or “Shades” modes
	SAVE, CANCEL, ∧, ∨	(4) Pushbuttons, navigate and execute setup functions
	Reset	Recessed miniature pushbutton for hardware reset
	Dimming Ramp Rate	5 seconds (default), software adjustable 1 to 10 seconds
	Scene Fade Time	2 seconds (default), software adjustable 0 seconds to 99 minutes
LED Indicators
	Scenes	(6-white) Correspond with each “Scene” Button
	High/Low	(2-white) Indicate “Shift” status
	ON	(1-white) Indicates “On” Scene is selected
	LIGHTS, SHADES	(2-green) Indicates “Lights” or “Shades” mode is active
	SAVE, CANCEL	(2-green) Correspond with “Save” and “Cancel” Buttons
	MIN, SEC	(2-green) Indicates display of “Minutes” or “Seconds”
	1 – 6	(6-green) 7-Segment bargraphs, indicate lighting levels and shade positions
	Numeric Display	(2-green) 8-Segment digits, indicates modes and setup values
IR Receiver
	Reception Frequency	36 kHz
	Requires CLS-IRHT8 IR remote, sold separately
Environmental
	Temperature	32° to 104°F (0° to 40°C)
	Humidity	10% to 90% RH (non-condensing)
Enclosure
	Mounts in a 4-gang electrical box, 3-1/2" (89 mm) deep minimum
Dimensions
	Height	4.48 in (114 mm)
	Width	8.89 in (226 mm)
	Depth	2.47 in (63 mm)
Weight
	1.43 lb (649 g)