環境控制

DM-RMC-4K-100-C

編碼/解碼介面

Provides a controller and interface for an HD or 4K display device as part of a complete DigitalMedia™ System. Connects to the DM 8G+™ output of a DM® Switcher or Transmitter via CAT5e or DM 8G® Cable. Includes IR, RS-232, and Ethernet control ports.

The DM-RMC-4K-100-C provides a simple one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM 8G+™ receiver and control interface, providing a single HDMI® output along with Ethernet, RS-232, and IR control ports. In addition to DM 8G+, it is also compatible with HDBaseT® specifications, allowing it to be connected directly to an HDBaseT certified source. Its compact, low-profile design allows the DM-RMC-4K-100-C to be installed discreetly behind a flat panel display or above a ceiling mounted projector. It connects to the head end or source location using a single CAT5e or Crestron DM 8G® cable.

Maximum Wire Lengths

Cable Type:

DM-CBL-8G DigitalMedia 8G™ Cable

330 ft (100 m) for 1080p60 Full HD

330 ft (100 m) for 1920x1200 WUXGA

330 ft (100 m) for 1600x1200 UXGA

330 ft (100 m) for 2048x1080 2K DCI

230 ft (70 m) for 2560x1440 WQHD

230 ft (70 m) for 2560x1600 WQXGA

230 ft (70 m) for 3840x2160 4K Ultra HD

230 ft (70 m) for 4096x2160 4K DCI

Cable Type:

CAT5e (or better) UTP or STP[1]

330 ft (100 m) for 1080p60 Full HD

330 ft (100 m) for 1920x1200 WUXGA

330 ft (100 m) for 1600x1200 UXGA

330 ft (100 m) for 2048x1080 2K DCI

165 ft (50 m) for 2560x1440 WQHD

165 ft (50 m) for 2560x1600 WQXGA

165 ft (50 m) for 3840x2160 4K Ultra HD

165 ft (50 m) for 4096x2160 4K DCI

Video

Input Signal Types DM 8G+™ (DigitalMedia™ over one CAT5e twisted-pair copper wire), HDBaseT® [1]

Output Signal Types HDMI®, DVI[2]

Formats DM 8G+, HDBaseT, & HDMI w/Deep Color, 3D, & 4K; DVI; HDCP content protection support

Input Resolutions, Progressive 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, 2560x1440@60Hz, 2560x1600@60Hz, 3840x2160@24Hz, 3840x2160@25Hz, 3840x2160@30Hz, 3840x2160@50Hz[5], 3840x2160@60Hz[5], 4096x2160@24Hz, 4096x2160@50Hz[5], 4096x2160@60Hz[5], plus any other resolution allowed by HDMI up to 300MHz pixel clock

Input Resolutions, Interlaced 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 300MHz pixel clock

Output Resolutions Matched to input

Audio

Input Signal Types DM 8G+, HDBaseT

Output Signal Type HDMI

Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, up to 8ch PCM

Communications

DigitalMedia DM 8G+, HDCP management, EDID format management, CEC, PoDM, HDBaseT compliant

Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP

Connectors

HDMI OUT (1) 19-pin Type A HDMI female;

HDMI digital video/audio output;

Also supports DVI[2]

COM (1) 5-pin 3.5mm detachable terminal block, bidirectional RS-232 port;

Up to 115.2k baud, hardware and software handshaking support

IR 1 – 2 (1) 4-pin 3.5mm detachable terminal block comprising (2) IR/Serial ports;

IR output up to 1.1 MHz;

1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud

LAN (1) 8-wire RJ45 female, shielded;

10Base-T/100Base-TX Ethernet port

Ground (1) 6-32 screw, chassis ground lug

DM IN (1) 8-pin RJ45 female, shielded;

DM 8G+ input, HDBaseT compliant;

PoDM and PoH PD (Powered Device) port[3];

Connects to the DM 8G+ output of a DM switcher, transmitter, or other DM device, or to a HDBaseT device, via CAT5e or Crestron DM-CBL-8G cable[1]

24VDC 0.75A MAX (1) 2.1 x 5.5 mm DC power connector;

24 Volt DC power input;

PW-2407WU power pack included

Controls & Indicators

HDMI OUT (1) green LED, indicates video signal presence at the HDMI output

LAN (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity

DM IN (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence

RESET (1) miniature recessed pushbutton, for hardware reset

SETUP (1) red LED and (1) miniature recessed pushbutton, for Ethernet setup

24VDC (1) green LED, indicates operating power supplied via local power pack, PoDM, or PoH

Power Requirements

Power Pack 0.75 Amps @ 24 Volts DC;

100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included

Power over DM (PoDM) PoDM PD (Powered Device), capable of being powered by a PoDM PSE (Power Sourcing Equipment), conforms to IEEE 802.3af (802.3at Type 1) Class 3 (12.95W)[6]

Power over HDBaseT (PoH) PoH PD (Powered Device), capable of being powered by a PoH PSE (Power Sourcing Equipment), conforms to IEEE 802.3af (802.3at Type 1) Class 3 (12.95W)[6]

Note: May be powered via power pack or PoDM/PoH, not both.

Environmental

Temperature 32° to 104°F (0° to 40°C)

Humidity 10% to 90% RH (non-condensing)

Heat Dissipation 29 BTU/Hr

Enclosure

Chassis Metal, black finish, with (2) integral mounting flanges, vented top and bottom

Mounting Freestanding, surface mount, or attach to a single rack rail

Dimensions

Height 6.09 in (155 mm)

Width 5.68 in (145 mm)

Depth 1.02 in (26 mm)

Weight

16.5 oz (468 g)