環境控制

CLX-1MC4

大型燈控

As part of a complete Crestron lighting system, the CLX-1MC4 motor control module provides control of up to 4 bidirectional motors for drapes, blinds, projection screens, lifts, etc. Each channel is rated for 10 Amps or 1/2 HP, with a total module rating of 16 Amps.

The CLX-1MC4 occupies a single module space in any CAEN automation enclosure. Termination of high-voltage wiring to the module is facilitated by a CLT-1MC4 terminal block, sold separately to enable termination of the wiring anytime prior to installing the module. CLX modules are controlled by the PAC2and PAC2M professional automation control systems via the Cresnet network. A 5-wire link provides bussing of the Cresnet and override signals between modules within an enclosure (interconnect jumpers included).

Load Ratings
	Motor Control Channels	4
	Per Channel	10 Amps, 1/2 HP
	Module Total	16 Amps
	Load Types	3-Wire Bidirectional Motors
Power Requirements
	120 Volts AC, 50/60Hz, single-phase
Connectors on Module
	Module Interconnect	(2) 5-pin 0.156 inch headers; Cresnet/Override interconnect ports; Connect to PAC2, PAC2M, CAEN-BLOCK, or adjacent CLX-Series module using interconnect cable provided
Connections via CLT Terminal Block (sold separately)
	LINE	(1) DIN rail terminal block, black, line power input
	OPEN 1 - 4	(4) DIN rail terminal blocks, red; Channel outputs "open"
	CLOSE 1 - 4	(4) DIN rail terminal blocks, blue; Channel outputs "close"
	N IN	(1) DIN rail terminal block, white, line input neutral
	N OUT 1 - 4	(4) DIN rail terminal blocks, white, channel output neutrals
Buttons
	SETUP	Used for TSID
LED Indicators
	PWR	(green) Indicates line power is applied to the LINE terminal
	NET	(yellow) Indicates communication with the control system
	1 – 4	(red x8) Indicates open or closed state of each channel
	SETUP	(red) Indicates unit is in setup/manual mode
Environmental
	Temperature	32° to 104°F (0° to 40°C)
	Humidity	10% to 90% RH (non-condensing)
	Heat Dissipation	15 BTU/Hr + (0.44 BTU/Hr x Load Current in Amps), 22 BTU/Hr at maximum load
Enclosure
	Gray metal with black heat sink, surface mount module with (2) integral mounting flanges; Occupies 1 module space in any CAEN enclosure
Dimensions
	Height	7.59 in (19.27 cm)
	Width	6.92 in (17.57 cm)
	Depth	3.43 in (8.70 cm)
Weight
	3.00 lb (1.36 kg)