Processor |
|
CPU |
32-bit Freescale ColdFire® Microprocessor |
Memory |
|
SDRAM |
32 MB |
|
NVRAM |
256 KB |
|
Flash |
4 MB |
Operating System |
|
Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+® |
Ethernet |
|
10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel andRoomView™ applications |
Connectors |
|
COM A - C |
(3) DB9 male, bidirectional RS-232/422/485 ports;
Up to 115.2k baud;
Hardware and software handshaking support;
All ports support C2N-NPA8 Network Poll Accelerator |
|
INFRARED-SERIAL OUTPUT A - H |
(8) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud;
Individual signal generator per port, allowing simultaneous firing of all ports |
|
I/O Versiports 1 - 8 |
(1) 9-pin 3.5mm detachable terminal block comprising (8) digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC;
Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms;
Programmable 5 Volts, 2k ohms pull-up resistor per pin |
|
RELAY OUTPUT 1 - 8 |
(2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays;
Rated 1 Amp, 30 Volts AC/DC;
MOV arc suppression across contacts |
|
LAN |
(1) 8-wire RJ45 with 2 LED indicators;
10/100BaseT Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity |
|
COMPUTER |
(1) DB9 female, RS-232 computer console port |
|
NET |
(1) 4-pin 5mm detachable terminal block;
Cresnet port, Master/Slave selectable;
Expandable via C2N-NPA8 Network Poll Accelerator |
|
24VDC |
(1) 2.1mm barrel DC power jack, 24 Volt DC power input;
(PW-2420RU power supply sold separately);
Passes through to NET port to power Cresnet devices |
Reset Buttons |
|
HW-R |
Hardware reset (reboots the control system) |
|
SW-R |
Software reset (restarts the SIMPL program) |
LED Indicators |
|
PWR |
(1 green) Indicates DC power supplied to unit |
|
NET |
(1 yellow) Indicates Cresnet bus activity |
|
MSG |
(1 red) Indicates control system has generated an error message |
|
LNK |
(1 red) Indicates a valid connection on LAN port |
|
ACT |
(1 red) Indicates activity on LAN port |
Power Requirements |
|
24 Watts (1 Amp) @ 24 Volts DC (PW-2420RU power supply sold separately) |
|
Available Cresnet Power |
26 Watts using PW-2420RU (sold separately) |
|
Cresnet Power Usage |
24 Watts (1 Amp @ 24 Volts DC) with no power supply connected to the 24VDC connector |
Environmental |
|
Temperature |
41° to 113°F (5° to 45°C) |
|
Humidity |
10% to 90% RH (non-condensing) |
Enclosure |
|
Chassis |
Steel, black matte powder coat finish |
|
Faceplate |
Extruded aluminum, black matte powder coat finish with polycarbonate label overlay |
|
Mounting |
Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included) |
Dimensions |
|
Height |
1.80 in (4.57 cm);
1.70 in (4.32 cm) without feet |
|
Width |
17.03 in (43.24 cm);
19.0 in (48.26 cm) with ears |
|
Depth |
6.66 in (16.91 cm) |
Weight |
|
3.54 lbs (1.59 kg) |